General(Voltage Regulator For CNC machine):
Our company designed elaborately this voltage regulator due to the high requirement of CNC machine tool and auto finish machining equipment for the quality of electric network.

The voltage regulator for CNC machine tool has the functions of high frequency interference resistance, anti-electromagnet, and anti-surge. It enjoys the features of split phase regulation, regulating rapidly and noiselessness.

Technical Specification(Voltage Regulator For CNC machine):
Rated capacity (KVA): 10~2400 KVA, 3~500 KVA
Input current (A): Correlation to the rated capacity
Input voltage (V): 380VAC+/-20% optional, 220VAC+/-20% optional
Output voltage (V): 380VAC+/-5% optional, 220VAC+/-5% optional
Phase number: Three phase single phase
Insulated strength: 2000V/1 Min does not have the puncture
Time for response: ≤1.5s (input fluctuation within 10%)
Efficiency: ≥98%
Waveform distortion: ≤0.1%
Working frequency (Hz): 50~60
Constant voltage precision: +/-5% adjustable

AVAILABLE VOLTAGE CHOICES

H DESIGN INPUT VOLTAGE RANGE OPTIONS

When there is a reasonable good mains supply, a NEOPOWER voltage stabilizer with an input variation range of ±15% (R15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the NEOPOWER voltage stabilizer.
Please Take a Note – These voltage stabilizers are not designed to support / protect voltage “back feeding” applications, where energy is required to be also fed back into the mains supply.

H DESIGN NPR-H-3P-R* Input Voltage Range & Output Accuracy


TECHNICAL SPECIFICATION 


PRODUCT SELECTION TABLE